3 Series E30 M3 (S14) CONVER
To make finding the shim thickness easier, the distance between
the shim and case can be measured with a feeler gage blade and
added to the thickness of the used shim.
Example:
Second bearing cap not tightened (bolts screwed in uniformly)
Specified friction torque reached and shaft seals not yet installed,
refer to Technical Data.
Gap measured with blade
0,20 mm
Used shim
1,40 mm
Install shim of thickness
1,60 mm
Install new shims, 1.60 mm gage, and repeat measurement.
RA Replacing input bevel gear and crown wheel (Type M) - final drive housing remove
BMW AG - TIS
30.01.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -