3 Series E30 M3 (S14) CONVER
Attach 100 mm of sealing tape on retaining clips flush with profile
piping and remove protective film.
Caution!
Place protective card on rear window with fleece face
downwards to ensure that this is not damaged when working
with the folding leg.
Raise leading edge of fabric at sides and in rounded recesses.
This area must be cemented. For this reason, clean with spirit or
methanol and allow to ventilate for approx. 5 minutes.
Apply even layer of profile rubber adhesive (sourcing reference:
BMW Parts Service) to reverse side of fabric edging and sealing
tape and allow to air-dry for approx. 10 minutes.
Raise profile piping with folding leg, insert leading edge of fabric
and rub vigorously with folding leg.
Note:
Counter support required from inside.
Rub away any excess adhesive where applicable.
Raise profile piping with folding leg and insert leading edge of
fabric.
Caution!
Risk of damage to rear window.
1.
Rear window
2.
Protective card
3.
PVC profile piping
4.
Folding leg
5.
Sealing tape
6.
Cover fabric
7.
Seam
8.
Zip fastener
RA Replacing rear window in convertible top (Convertible)
BMW AG - TIS
30.01.2013 02:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
