3 Series E36 316g (M43) COMP
E36/7 (Z3)
Measure amount by which detent buffer (1) protrudes on left and
right sides and note down. Remove left and right detent
buffers (1).
Installation:
Reinstall detent buffer (1) at noted dimension.
E36/7 (Z3)
Unclip cable and lines and place to one side.
Connect special tool 00 0 200 to special tool
00 0 201/202/204/207.
Note:
Special tool 00 0 207 is secured in bore of detent buffer and
behind carrier support beside spring dome.
E36/7 (Z3)
Fit special tool 00 0 200, secure to front suspension lug of
engine and lift engine approx. 5 mm.
All others
Fit special tool 00 0 200 to special tool 00 0 201/202/204/206
and attach.
Note:
The brackets must be located on the bolt connections on both
side walls.
Attach special tool 00 0 200 to front suspension lug on
engine and lift engine approx. 5 mm.
RA Removing and installing, sealing or replacing oil pan (M43 / M43TU)
BMW AG - TIS
17.01.2013 10:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
