3 Series E36 316g (M43) COMP
Remove the oil line for camshaft lubrication.
Tightening torque,
refer to Technical Data 11 42 7AZ.
Locate camshaft with special tool 11 3 190 in firing TDC position
of first cylinders.
Note:
The gear cover lid is not illustrated to give a better view.
Carefully and slowly push back tensioning rail at hexagon and fit
chain wheel with chain.
Note:
Arrow on chain wheel in cylinder axis points up, elongated
holes in centre.
Tighten the chain wheel using two screws.
Tightening torque,
refer to Technical Data 11 31 3AZ.
RA Replacing camshaft (M43)
BMW AG - TIS
17.01.2013 10:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
