3 Series E36 316g (M43) COMP
Connect special tool 13 8 010 to diagnosis connector, switch on
ignition and operate special tool to activate high-pressure non-
return valve.
Caution!
Be sure to remove special tool 13 8 010 prior to test run, as
otherwise malfunctions can occur during driving operation.
Connect special tool 16 8 010 to filler connection. Connect hose
to workshop compressed air circuit (dehumidified air).
Check screw connection (1) for leaks with leak tester spray.
Check connection on high-pressure relief valve with 14 bar switch
for leaks with leak tester spray.
RA Checking CNG system for leaks and correct pressure (E36)
BMW AG - TIS
17.01.2013 12:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
