3 Series E36 316g (M43) COMP
Open Swage-Lok connection (2), bracing the hex head (1) with an
open-end wrench,
refer to section on opening/closing CNG-Swage-Lok connections
Unfasten hex nuts (2).
Tightening Torque, refer to
Technical Data 13 83 3AZ
Thread out entire filler connection (1) with line.
Installation:
Always replace complete filler connection with leak-tested
line, bracket and hose sheath.
Installation:
Perform leak and pressure test,
refer to 13 80 600
RA Removing and installing/replacing CNG filler connection (E36)
BMW AG - TIS
17.01.2013 12:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -