3 Series E36 316g (M43) COMP
C
9.02 mm
e -
0.10 mm
C nominal
8.92 mm
Y measured on dial gauge
2.12 mm
+ master disc thickness
7.00 mm
C actual
9.12 mm
C nominal
9.12 mm
C actual
- 8.92 mm
a
0.20 mm
master disc A
3.90 mm
- a
0.20 mm
Thickness of shim (X)
4.10 mm
If C nominal is less than C actual, "a" on the shim ring (x) is
added to the value.
The permitted tolerance for dimension (x) is derived from the
gauge steps available for shim rings (0.01 ... 0.03 mm).
RA Replacing drive pinion with crown wheel (Type K) - final drive removed -
BMW AG - TIS
17.01.2013 14:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
