3 Series E36 316g (M43) COMP
Mark cutting line on reinforcement plate for the transmission
tunnel as shown and make cut.
A = approx. 140 mm
Remove scrap metal.
Mark cutting line on inside of engine carrier and make cut.
A = approx. 110 mm from engine wall
B = approx. 130 mm from screw connection on control arm
Mark cutting line on outside engine carrier and make cut.
A = approx. 110 mm from engine wall
B = approx. 130 mm from screw connection on control arm
Clean engine carrier connection and drill holes for plug welding.
RA Replacing left front engine carrier (without wheel housing) (partial replacement
BMW AG - TIS
17.01.2013 15:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
