3 Series E36 316g (M43) COMP
Fit in and weld outer panel of B-pillar.
Weld B-pillar on reinforcement plates.
Space welding spots on upper and lower B-pillar welding points so
close together, that a closed seam is produced.
Grind welding points until smooth.
Connection point
-
B-pillar outer panel, top
-
B-pillar outer panel, bottom
Tin out and grind down.
Weld hinges and retaining hook.
Note:
Shown as seen from inside of car.
RA Replacing left or right outer section on center door pillar (partial replacement
BMW AG - TIS
17.01.2013 15:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
