3 Series E36 316g (M43) COMP
Roughly cut through side panel beside connection in rear apron
and lamp carrier.
Roughly cut along side panel at connection between wheel
housing and wheel arch extension.
Expose joint between side panel / floor assembly and cut open.
Cut out connection for vehicle jack support from side panel to
enable side wall to be removed without vehicle jack support.
Open up welding points for connection of reinforcement between
door lock and B-pillar.
Take off side panel.
RA Replacing rear left side panel (partial replacement of C-pillar or B- and C-pill
BMW AG - TIS
17.01.2013 15:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
