3 Series E36 316g (M43) COMP
Produce reinforcement plate for connection between side panel /
C-pillar beside water gutter.
Note:
The reinforcement plate must overlap on each side by at least
30 mm.
Drill out holes for plug welding reinforcement plates in the body.
Coat connecting faces on body and reinforcement plates with
zince dust paint.
Adjust reinforcement plate to fit in side member and weld up.
Adjust reinforcement plate to fit in B-pillar and weld up.
Adjust reinforcement plate to fit C-pillar beside water gutter and
weld up.
RA Replacing rear left side panel (partial replacement of C-pillar or B- and C-pill
BMW AG - TIS
17.01.2013 15:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
