bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing _ Replacing Headliner (version With Slide_tilt Or Foldin|Page 2010 > < 1 RA Removing And Installing _ Replacing Headliner (version With Slide_tilt Or Foldin
Page 2
background image

Lift off trim panels.

Unfasten screws and remove grab handles.

Lift off left or right rear expansion rivet.

Pull off edge guard.

Installation:

If necessary, replace damaged expansion rivets.

Caution!

Do not bend the roof liner.

Move front seats forward as far as possible.

Fold down passenger-seat backrest.

Put driver seat backrest into upright position.

Hold roof liner tight and pull off edge guard.

Lift out roof liner backwards.

RA  Removing and installing / replacing headliner (version with slide/tilt or foldin

BMW AG - TIS

17.01.2013  16:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing _ Replacing Headliner (version With Slide_tilt Or Foldin|Page 2010 > < 1 RA Removing And Installing _ Replacing Headliner (version With Slide_tilt Or Foldin