3 Series E36 316g (M43) COMP
54 11 205
Removing and installing/replacing net insert
for wind deflector
Open folding sunroof.
Completely detach net insert (1) from upper profile strip (2).
Note:
The profile strip (2) is pretensioned and folds upwards.
Remove net insert (1) from lower profile strip (2).
Installation:
Moisten profile at bottom (2) and top (3) of net insert (1) with
water.
Fit net insert (1) in lower profile strip.
Press on net insert (1) so that it is flush on the outside first and
then in the middle.
Press the rest uniformly into the upper profile rail (2).
RA Removing and installing/replacing net insert for wind deflector
BMW AG - TIS
17.01.2013 16:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -