3 Series E36 316g (M43) COMP
54 11 020
Removing and installing/replacing extension
lever for folding sunroof
Release cover at rear:
Measure gap (A) on closed folding sunroof and note down
(required for installation).
(1)
Rear cover
(2)
Edge of roof
Dimension (A) = approx. 6.5 mm
Completely remove mucket from headliner.
Installation:
Assembly sequence for mucket:
-
Attach at center rear (marking)
-
Attach at center right (marking)
-
Attach at center left (marking)
-
Attach at center front (marking)
-
Attach remaining mucket uniformly
Open folding sunroof approx. 150 mm.
Disconnect wire from back of headliner and disconnect from
profile rail and corner sections.
Installation:
Insert wire (1) in corner sections (2) then insert in profile rail
(3).
Before closing, first fit mucket to headliner.
RA Removing and installing/replacing extension lever for folding sunroof
BMW AG - TIS
17.01.2013 16:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
