3 Series E36 316i (M40) SAL
Loosen hose clamp, hose holder and securing screws.
Lift intake muffler away with mass air flow sensor
Remove air-intake bellows.
Pull off vacuum hose for idle-speed actuator.
Unclip cable bracket.
Disconnect throttle cable (Bowden cable) from throttle,
refer to 35 41 421.
Remove alternator drive belt,
refer to 12 31 299.
Unfasten left reservoir for power steering assistance from engine
support arm and tie up to one side.
RA Removing and installing engine (M40)
BMW AG - TIS
18.01.2013 03:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
