3 Series E36 316i (M40) SAL
Press on rotor (1) and take off washer (3).
Check installed position of washer (3).
Check slip rings for wear, fine-grind and polish if necessary,
refer to 12 31 200
Unsolder stator winding on diode plate.
Caution!
Excessive heat from soldering iron would destroy diodes.
If necessary, press rubber mount out of housing.
Order:
1.
Circlip
2.
Washer
3.
Rubber mount
4.
Washer
5.
Bushing
RA Disassembling and assembling alternator (Bosch 65 A)
BMW AG - TIS
18.01.2013 03:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
