3 Series E36 316i (M40) SAL
24 34 865
Replacing pressure regulator - oil sump
removed (A4S 270R/ 310R)
Press off wires (1 and 2).
Remove screw (3).
Important!
Inch threads.
Take off holder (4).
Pull out pressure regulator.
Installation:
Insert pressure regulator.
Install holder (4) with curved surface facing out and tighten bolt.
Tightening torque,
refer to Technical Data.
RA Replacing pressure regulator - oil sump removed (A4S 270R/ 310R)
BMW AG - TIS
18.01.2013 04:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
