3 Series E36 316i (M40) SAL
32 33 000
Removing and installing steering wheel (with
airbag)
Remove airbag unit,
refer to 32 34 020.
Warning!
Comply with safety precautions!
Incorrect handling can activate airbag and result in injury.
Disconnect battery and cover negative pole or terminal.
Turn steering wheel to straight-ahead position (markings on
steering gear and steering spindle aligned).
Unscrew bolt. Mark position of steering wheel relative to steering
spindle. Pull off steering wheel.
Note:
The loosening of the screw activates the spring clip (1) which
holds contact ring in centre position.
RA Removing and installing steering wheel (with airbag)
BMW AG - TIS
18.01.2013 05:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -