3 Series E36 316i (M40) SAL
Uncover and break bulb holder carrier and tail panel joints.
Take off side panel.
Remove scrap metal.
Clean and straighten mating surfaces.
Shoulder mating surface on side panel with a shouldering tool.
Produce reinforcement plates for the water drain.
Width = at least 60 mm
At least 30 mm overlap on each side.
RA Replacing left rear side panel (partial replacement)
BMW AG - TIS
18.01.2013 07:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
