3 Series E36 316i (M40) SAL
Preset striker.
Door height (1): flush
Door protrusion (2): 0 to 1 mm
Tighten screws on striker.
Tightening Torque = 28 Nm
Shut Door:
Place special tool 41 5 031 (gage) in area of the B-pillar and
special tool 41 5 032 (gage) on roof joint (parallel to windshield
rubber frame) with tongue (1) between roof frame and roof.
Door adjustment (tension and height) is correct if both gages can
be placed without play and contact surfaces (2) bear uniformly.
RA Aligning front doors
BMW AG - TIS
18.01.2013 07:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
