3 Series E36 316i (M40) SAL
Note:
For purposes of clarity, illustration shows removed headlight.
Detach spray nozzle from telescope.
Release screws and remove telescope.
Installation
Installation of telescope is described separately from telescope.
Make sure sleeve (1) is correctly seated.
Attach telescope then fit spray nozzle on holder.
Tighten screws so that they are finger tight.
Adjust telescope through elongated holes on holder so that spray
nozzle rests without a gap on bumper (slight pretension of spray
nozzle to telescope).
Tighten screws.
Observe tightening torque, 61 7 1AZ + 2AZ
.
Adjust spray nozzles for headlight cleaning system.
RA Removing and installing/replacing left or right telescope for headlight cleaning
BMW AG - TIS
18.01.2013 08:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
