3 Series E36 316i (M43) COMP
Unfasten plug connection (1).
Unscrew temperature sensor (1).
Tightening torque,
refer to Technical Data 13 62 2AZ
Installation:
Replace sealing ring.
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
Check coolant level and top up if necessary.
from 9/95:
Disconnect connector.
from 9/95:
Unscrew and remove temperature sensor.
Tightening torque,
refer to Technical Data 13 62 6AZ
RA Replacing temperature sensor for coolant (M43)
BMW AG - TIS
18.01.2013 20:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -