3 Series E36 316i (M43) COMP
Press out outer bearing race with special tool 33 1 350
(extractor fixture) and special tool 33 1 351 (extractor star tool).
Caution!
Special tool must engage in the bearing outer race.
Installation:
Press-fit new bearing outer races with special tool 33 1 373
(pressure plate).
Caution!
Only use same make bearings for both bearings.
If applicable, replace shaft seal for input flange,
refer to 33 11 021
If applicable, replace drive pinion,
refer to 33 12 551
RA Removing complete locking differential. (Type K) - final drive removed -
BMW AG - TIS
18.01.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -