3 Series E36 316i (M43) COMP
61 62 . . .
Repairing line tube to rear window washer
unit
Cut out the defective section of line tube. Cut an appropriate
length of hose 6166 1 357 388 (sold by meter). Slide hose clips
1613 1 379 229 over ends of wires. Connect ends of both lines
to cut length of hose. The hose must be pushed at least A = 12
mm onto the line ends.
Installation:
Coat ends of lines with anti-friction agent.
Arrange hose clips on the overlap and tighten down firmly.
Wrap hose clips in insulating tape to prevent chafing.
RA Repairing line tube to rear window washer unit
BMW AG - TIS
19.01.2013 00:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -