3 Series E36 316i (M43) SAL
13 64 541
Removing and installing/replacing all fuel
injection valves (M42, M43 to 9/95)
Switch off ignition.
Turn and pull off multiple pin connector (1).
Unfasten screw from active carbon filter lead.
Loosen hose clamp and pull bellows off throttle-valve assembly.
Unfasten clips (4 pieces), remove upper section of air-filter
housing with air-mass sensor and bellows.
RA Removing and installing/replacing all fuel injection valves (M42, M43 to 9/95)
BMW AG - TIS
20.01.2013 04:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -