3 Series E36 316i (M43) SAL
Remove front underbody protection and unfasten drain plug at
bottom of radiator if necessary.
Installation:
Replace gasket.
Tightening Torque, refer to Technical Data 17 11 2AZ
Drain, catch and dispose off coolant.
All 6-cylinder engines
Unfasten drain plug on engine block.
Installation:
Replace gasket.
Tightening Torque, refer to Technical Data 11 11 5AZ
Drain, catch and dispose off coolant.
All 4-cylinder engines
Unfasten drain plug on engine block.
Installation:
Replace gasket.
Tightening Torque, refer to Technical Data 11 11 5AZ
Drain, catch and dispose off coolant.
Top up coolant!
Separate expansion tank
No bleed screws on radiator and thermostat housing!
All bleeding occurs through the vent pipe which leads to the
connection on the expansion tank.
Coolant system is vented during the filling procedure.
RA Draining and topping up coolant
BMW AG - TIS
20.01.2013 04:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -