3 Series E36 316i (M43) SAL
Coat sealing rings only with brake fluid.
Do not use ATE brake-cylinder paste.
Press tank into plugs with connectors as far as it will go so that
they are precisely perpendicular.
Carefully connect connecting hoses of hydraulic control unit and
clutch to connectors of expansion tank (make sure hoses are not
mixed up).
Fill expansion tank with new brake fluid until level reaches MAX
mark (refer to specifications on BMW Operating Fluids).
Vehicle without ABS,
refer to 34 00 046
Vehicle with ABS,
refer to 34 00 047
Vehicle with ASC+T,
refer to 34 00 048 .
Correct fluid level. Watch seal (1).
RA Replacing expansion tank for hydraulic brake operation up to 9/96
BMW AG - TIS
20.01.2013 06:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -