3 Series E36 316i (M43) SAL
Remove protective cap using a screwdriver.
Pull out Bowden cable towards rear of vehicle.
Installation:
Guide in Bowden cable as far as stop.
Engine M44:
Remove cap (1).
Press together both locking hooks of nipple mount and press
nipple mount out of operating lever.
The subsequent work step is identical to that for the M52 engine,
see above.
RA Replacing Bowden cable for throttle valve actuation
BMW AG - TIS
20.01.2013 06:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -