3 Series E36 316i (M43) SAL
Fit in and clamp side panel.
Place welded spots on edge of the side panel replacement section
close enough to produce a closed seam.
Caution!
Always wait for one spot to cool down slightly before
producing an adjacent welding spot.
Danger of distortion!
Spot weld wheel housing and wheel housing extension and grind
until smooth.
Spot weld bulb holder carrier and tail panel joints and braze.
Place welded spots on water drain close enough to produce a
closed seam.
Caution!
Always wait for one spot to cool down slightly before
producing an adjacent welding spot.
Danger of distortion!
RA Replacing left rear side panel (partial replacement)
BMW AG - TIS
20.01.2013 07:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
