3 Series E36 316i (M43) SAL
51 11 794
Replacing one impact absorber for rear
bumper
(bumper removed)
(if necessary, remove front bumper, refer to 51 11 000)
Unscrew bolt and remove bumper carrier bracket.
Installation:
Replace screw (microencapsulation) or install old screw with
Loctite 270 (Sourcing Reference
BMW Parts Service).
Tightening torque, refer to Technical Data 51 11 2AZ
Unfasten screws and remove shock absorber.
Tightening torque, refer to Technical Data 51 11 3AZ
Installation:
The height of the bumper is adjusted by turning the socket
head cap screw (1) on the shock absorber (2).
RA Replacing one impact absorber for rear bumper
BMW AG - TIS
20.01.2013 07:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -