3 Series E36 316i (M43) SAL
Unscrew bolts.
Unfasten cable connector.
Disconnect plugs (1 and 2).
Unlock and pull off receptacle forwards.
Note:
Tilt seat cushion shell upwards and hold in this position (e.g.
support with a hammer).
For Drive with 3 Screws:
Remove screws (1) and (2).
Remove forward/back control drive towards rear.
Installation:
Place flexible drive shafts (1) in gearboxes (2).
Guide drive shafts into drive (3) and tighten drive screws.
RA Removing and installing left or right front seat
BMW AG - TIS
20.01.2013 08:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -