3 Series E36 316i (M43) SAL
64 11 208
Replacing heater core (air conditioner)
Removing air collector,
refer to 64 11 207
For description of previous work,
refer to 64 11 207
Removing heater controls,
refer to 64 11 750
Removing shelf,
refer to 51 16 200
Loosen nut and place water flange to one side. Carefully blow air
into the feed lines to prevent that residual cooling water in heater
core does not drip onto carpet.
Tightening torque refer to Technical Data 64 21 3AZ
Unscrew studs.
Installation note:
Replace O-rings.
For tightening torque refer to Technical Data 64 21 2AZ
Unscrew bolts and pull back three-way-flange.
RA Replacing heater core (air conditioner)
BMW AG - TIS
20.01.2013 09:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -