3 Series E36 316i (M43) TOUR
00 00 ...
Cleaning brake shoes and drums for service brake, checking wear, replacing if necessary.
Wheel brake cylinders and dust sleeves: visual inspection for leaks and secure seating (not
during 1st inspection I.).
Remove rear brake drums. For subsequent procedure, refer to
Removing and installing brake shoes.
Note:
-
Check wear on brake shoes and drums (refer to Technical Data), replace if necessary.
-
Clean brake drums and linings.
-
Carefully remove dust sleeves of wheel brake cylinders and check that no brake fluid is located underneath. If
necessary, replace left and right wheel brake cylinders after consulting the customer and issue a separate invoice.
-
Check retaining screws of wheel brake cylinders for secure seating.
RA Cleaning brake shoes and drums for service brake, checking wear, replacing if ne
BMW AG - TIS
20.01.2013 11:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -