3 Series E36 316i (M43) TOUR
11 13 000
Removing and installing, sealing or replacing
oil pan (M43 / M43TU)
Note:
For removal of oil pan, front axle support must be lowered.
There is no need to perform a front axle alignment check.
Drain engine oil,
refer to 00 00 249.
Disconnect adapter from brake booster.
Loosen guide pipe for dipstick.
Installation:
Check/replace sealing ring.
RA Removing and installing, sealing or replacing oil pan (M43 / M43TU)
BMW AG - TIS
20.01.2013 11:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
