3 Series E36 316i (M43) TOUR
Caution!
Remove special tool 11 3 190 from cylinder head.
Remove special tool 11 2 300 from locating bore in engine
block.
Turn central screw to rotate crankshaft until remaining two screws
are accessible.
Tighten the screws.
Tightening torque,
refer to Technical Data 11 31 3AZ.
Assemble engine.
RA Replacing camshaft (M43)
BMW AG - TIS
20.01.2013 11:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
