3 Series E36 316i (M43) TOUR
Carefully and slowly push back tensioning rail at hexagon and fit
chain wheel with chain.
Note:
Arrow on chain wheel in cylinder axis points upwards; align
elongated holes in centre.
Insert screws, secure chain wheel to camshaft.
Tightening torque,
refer to Technical Data 11 31 3AZ.
Remove special tools 11 2 300 and 11 3 190.
If necessary, check timing diagram,
refer to 11 31 005.
Assemble engine.
RA Replacing timing chain (M43)
BMW AG - TIS
20.01.2013 11:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
