3 Series E36 318i (M42) CONVER
34 33 505
Removing and installing or replacing brake
booster
Note:
After conclusion of work, bleed brakes. vehicles without
ABS,
refer to 34 00 046
Vehicle with ABS,
refer to 34 00 047
Remove brake master cylinder,
refer to 34 31 500
Remove ABS hydraulic control unit,
refer to 34 51 520
Pull off distance-sensor connector.
Pull vacuum hose off brake booster.
Remove panelling for instrument panel at bottom left,
refer to Gr. 51
Remove retainer/pin on swivel joint of operating rod.
Installation:
Adjust brake-light switch,
refer to Gr. 61
RA Removing and installing or replacing brake booster
BMW AG - TIS
22.01.2013 15:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -