3 Series E36 318i (M42) CONVER
Produce reinforcement plate with width (B) of about 60 mm and
coat with zinc dust paint.
Insert reinforcement plates half their width into engine carrier and
plug weld.
Align partial replacement piece, plug weld and weld in welding
joint.
Grind down and clean welded seam and welded spots.
Tin out joints.
Cringe protruding sheet metal in shown zone.
RA Replacing left front engine carrier (without wheel housing) (partial replacement
BMW AG - TIS
22.01.2013 16:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -