3 Series E36 318i (M42) CONVER
Raise the door window.
Door window (1) must bear on gasket (2) at the right upper edge
if the door has reached distance (D).
Distance (D) is measured about 20 mm above the door fold.
Distance (D) = 8 mm (convertible 3 mm)
Parallelism (window tilt):
Raise the door window and mark along the seal at top and bottom
using a water-colour marker.
Note:
Clean the door window glass.
Loosen the screw.
Adjust parallelism and tighten down screw.
Tightening torque, refer to Technical Data 51 32 4AZ
Open the door and apply special tool 51 3 080 to the door
window.
Close door and check retraction depth (C).
Dimension (C) is measured on A-pillar.
Retraction depth (C) = 1.0 ... 1.5 mm
Caution!
Checking limit stop,
refer to 51 32 ...
RA Adjusting left or right front door window (coupé and convertible)
BMW AG - TIS
22.01.2013 17:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -