3 Series E36 318i (M42) CONVER
Retraction depth (B):
Lower door window and remove rubber plugs from bottom of door.
Installation:
Insert the rubber plugs.
Adjust height stops through holes.
Caution!
Measurement (B) is dictated by the door seal, which settles in
the course of time.
Consequently the height stops must be adjusted so that the
door window can be lowered even after failure of automatic
lowering.
Checking limit stop,
refer to 51 32 ...
Retraction depth (C):
Version with "one" adjusting hole:
Loosen screws and adjust retraction depth (C) on the window
guide rail.
Retraction depth (C) = 1.0 ... 1.5 mm
Raise and align door window.
Tighten the screws.
For tightening torque, refer to Technical Data 51 32 4AZ
Caution!
Checking limit stop,
refer to 51 32 ...
RA Adjusting left or right front door window (coupé and convertible)
BMW AG - TIS
22.01.2013 17:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
