3 Series E36 318i (M42) CONVER
61 35 150
Removing and installing or replacing
cabriolet soft-top module (CVM)
Caution!
Activating rollover protection system before disassembly,
refer to 54 62 001.
Remove insert for side trim panel,
refer to 51 43 110
With BMW SERVICE TESTER or MoDiC:
-
- Read and record meter readings on cabriolet soft-top
module
-
Meter reading for number of times soft top was opened and
closed
-
Meter reading for rollover protection system
-
Encode new control unit with MoDiC e.g.: installed special
equipment
-
Initializing motor-driven soft top,
refer to 54 34 002
-
For additional instructions, refer to Vehicle Electric/Electronic
Test Plan, 3 Series E36
Unfasten screws from cabriolet soft-top module (1).
Disconnect connector.
RA Removing and installing or replacing cabriolet soft-top module (CVM)
BMW AG - TIS
22.01.2013 18:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -