Initialization Procedure for Window Regulator on BMW E36 318i M42
61 35 ...
Initialization of window regulator
Registration of the actual position is accomplished with pulse sensors located on the relevant power-window drive.
The reference point for initialization is the mechanical stop with a raised power window and shut door (2-door models).
Initialization is carried out if a stop is recognized while raising the power windows after shutting the door (2-door
models). For initialization, raise window and keep power-window switch in raising position for about 5 seconds.
If power windows are not initialized, tip function is blocked and clamping protection is not activated!
Initialization is checked during normal operation by carrying out a truth test of the measured position.
If no stop is recognized while raising the window within a given range, initialization is discarded and the raising tip
function blocked.
If no stop is recognized while lowering the window within a given range, the initialization will also be discarded and tip
function blocked in both directions.
If there is a stop while lowering the window within a given range, the initialization will be updated (adaptive initialization).
RA Initialization of window regulator
BMW AG - TIS
22.01.2013 18:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -