3 Series E36 318i (M42) SAL
Removing drive belt (M42)
Loosen bolt (1).
Loosen nuts on bolts (2 and 3) and turn bolt (3) in direction of
arrow to slacken drive belt.
Take off drive belt.
Installation:
Adjust Vee-belt tension with special tool 11 5 020 by
rotating screw (3) in direction of arrow.
Tighten nut on bolt (3).
Tighten bolts (1 and 2).
RA Removing drive belt (M42)
BMW AG - TIS
23.01.2013 08:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -