3 Series E36 318i (M42) SAL
Caution!
Make sure sleeves (3 and 4) are correctly seated.
Replace seals.
Pull connector strip off fuel injectors.
Remove fuel inlet and return lines and unfasten screws on fuel rail
bracket. Remove complete fuel rail with fuel injection valves.
Catch and dispose of escaping fuel.
Installation:
Replace hose clips and fuel hoses.
Remove inlet hoses (1) from fuel injection valves surrounded by
air.
RA Removing and installing/replacing all fuel injection valves (M42, M43 to 9/95)
BMW AG - TIS
23.01.2013 09:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -