3 Series E36 318i (M42) SAL
Compact final drive:
Detach drive flange with special tools 31 2 101 , 31 2 102 ,
31 2 103 .
Pull out shaft seal with special tool 00 5 010 .
Drive in new shaft seal as far as it will go:
-
Special tools 00 5 500 and 33 3 430 for transmission type
"K" (side cover with 4 screws)
-
Special tools 00 5 500 and 33 3 470 for transmission type
"M" (side cover with 6 screws)
-
Special tools 00 5 500 and 33 3 440 for transmission type
"G" (side cover with 8 screws)
Coat sealing lips of shaft seal and sealing face of drive flange with
differential oil.
Attach drive flange.
Press on drive flange with special tool 23 1 300 , if necessary
23 1 302 until collar nut can be screwed on.
RA Replacing shaft seal for drive flange on final drive
BMW AG - TIS
23.01.2013 11:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -