3 Series E36 318i (M42) SAL
61 31 260
Replacing transmission switch
Remove screw for shift-lever grip.
Pull handle off shift-lever grip.
Unclip shift-lever cover.
Disconnect plug-in connection.
Unscrew bolts.
Position shift lever in such a way that driver of switch can be
worked out of slot.
Installation note:
Screws are micro-encapsulated and must be replaced.
Tightening torque,
refer to Technical Data 61 31 5AZ
RA Replacing transmission switch
BMW AG - TIS
23.01.2013 15:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -