3 Series E36 318i (M42) SAL
62 13 050
Removing and installing/replacing clock
Analog clock only:
Insert a feeler gauge approx. 0.9 to 1 mm thick at bottom between
clock and frame, lever out clock and disconnect plug.
Insert a feeler gauge on right between frame and lower tray.
Starting on right, lever out frame while dragging feeler gauge
towards left.
Digital clock only:
Insert a feeler gauge approx. 0.9 to 1 mm thick between frame
and lower tray. Starting from right side, press down locking lever
and lever out display unit.
Pull off connectors.
Compact only:
Remove radio or radio cover,
refer to 65 11 030.
Press clock at rear outwards until it snaps out on right.
Press left-hand clip and lever out clock.
RA Removing and installing/replacing clock
BMW AG - TIS
23.01.2013 15:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -