3 Series E36 318i (M43) CONVER
Installation
Installation of cylinder head is described separately from removal.
Assembly sequence for removal and installation is different.
Clean sealing faces of cylinder head and crankcase; if necessary,
remove traces of sealing compound with hardwood spatula. While
proceding, make sure that no remnants of sealing compound drop
into the oilways and cooling ducts.
Check that dowel sleeves are undamaged and correctly located.
Replace cylinder head gasket and rubber profile gasket.
Caution!
Use cylinder-head bolts once only.
No oil is permitted in the threaded bores in the crankcase.
Note:
Risk of cracking, incorrect tightening values.
When installing cylinder head, press bow cover outwards.
RA Removing and installing/sealing cylinder head (M43)
BMW AG - TIS
24.01.2013 05:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -