3 Series E36 318i (M43) CONVER
11 12 595
Checking a valve guide for wear (M43 /
M43TU)
(Valve removed)
To measure tilt clearance, insert new valve so that valve stem end
is flush with valve guide.
Mount dial gauge and measure tilt clearance.
Note:
Max. permissible tilt clearance,
refer to Technical Data.
Note:
If the tilt clearance is too large, ream out the valve guide and
install a repair valve with a larger stem diameter,
refer to Technical Data.
If necessary, ream out valve guide,
refer to 11 12 600.
RA Checking a valve guide for wear (M43 / M43TU)
BMW AG - TIS
24.01.2013 05:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -