3 Series E36 318i (M43) CONVER
11 23 031
Replacing hub in vibration damper (M43)
Special tools required:
•
11 2 150
•
11 2 410
Remove vibration damper.
Note:
Remember to fit dowel pin.
Secure special tool 11 2 150 with special tool 11 2 410
(shim on version with A/C system) to hub for vibration damper.
When releasing and tightening down central bolt, grip special
tool 11 2 150 with assistance of a second person.
If it is not possible to grip the tool securely: Remove mounted
parts until the special tool 11 2 150 can be supported on the
engine carrier without damaging other components.
Caution!
Protect engine bracket from damage.
Insert wood between engine carrier and special tool 11 2 150 .
Unscrew central bolt. Detach hub for vibration damper.
Replace radial seal in lower timing case cover.
RA Replacing hub in vibration damper (M43)
BMW AG - TIS
24.01.2013 06:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -